Table of Contents
Advertisement
Table 17: Assigning Forwarding Classes to Output Queues (continued)
Task
Assign expedited forwarding traffic to
queue 1.
Configure an assured forwarding class
classifier.
Related
Documentation
Configuring CoS Interfaces (NSM Procedure)
22
Action
1.
Select Queue and click Add new entry.
2. In the Queue num box, type 1.
3. In the Class name box, type the previously configured name of the expedited
forwarding class—for example, ef-class.
4. Click OK.
1.
Select Queue and click Add new entry.
2. In the Queue num box, type 3.
3. In the Class name box, type the previously configured name of the assured
forwarding class—for example, af-class.
4. Click OK.
Configuring CoS Classifiers (NSM Procedure) on page 15
Configuring CoS Code Point Aliases (NSM Procedure) on page 17
Configuring CoS Drop Profile (NSM Procedure) on page 19
Configuring CoS Interfaces (NSM Procedure) on page 22
Configuring CoS Rewrite Rules (NSM Procedure) on page 28
Configuring CoS Schedulers (NSM Procedure) on page 31
Configuring CoS and Applying Scheduler Maps (NSM Procedure) on page 32
An interface is configured for optimal performance in a high-traffic network. This feature
enables you to configure interface-specific CoS properties for incoming packets.
To configure CoS interfaces in NSM:
In the navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the device for which you want to
2.
configure CoS interfaces.
Click the Configuration tab. In the configuration tree, expand Class of Service.
3.
Select Interfaces.
4.
Add or modify the interfaces as specified in Table 18 on page 23.
5.
Click one:
6.
OK—Saves the changes.
Cancel—Cancels the modifications.
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
