Danfoss VLT AutomationDrive FC 360 Programming Manual page 93

Programming Guide | VLT® AutomationDrive FC 360
3-16 Reference 2 Source
Default value:
[2] Analog Input 54
Setup:
All setups
Data type:
Uint8
Select the reference input to be used for the second reference signal. Parameter 3-15 Reference 1 Source, parameter 3-16 Reference 2
Source, and parameter 3-17 Reference 3 Source define up to 3 different reference signals. The sum of these reference signals defines the
actual reference.
Option
[0]
[1]
[2]
[7]
[8]
[11]
[20]
[32]
3-17 Reference 3 Source
Default value:
[11] Local bus reference
Setup:
All setups
Data type:
Uint8
Select the reference input to be used for the third reference signal. Parameter 3-15 Reference 1 Source, parameter 3-16 Reference 2
Source, and parameter 3-17 Reference 3 Source define up to 3 different reference signals. The sum of these reference signals defines the
actual reference.
Option
[0]
[1]
[2]
[7]
[8]
[11]
[20]
[32]
Danfoss A/S © 2024.01
Parameter type:
Conversion index:
Change during operation:
Name
No function
Analog Input 53
Analog Input 54
Frequency input 29
Frequency input 33
Local bus reference
Digital pot. meter
Bus PCD
Parameter type:
Conversion index:
Change during operation:
Name
No function
Analog Input 53
Analog Input 54
Frequency input 29
Frequency input 33
Local bus reference
Digital pot. meter
Bus PCD
AU275649936274en-001401 / 130R0507 |
Option
–
True
Option
–
True
91