Danfoss VLT AutomationDrive FC 360 Programming Manual page 35

Programming Guide | VLT® AutomationDrive FC 360
Parameter Descriptions
4
Parameter Group 0-** Operation/Display
4.1
Introduction
4.1.1
This chapter introduces parameters related to the basic functions of the drive, function of the LCP buttons, and configuration of the LCP
display.
0-0* Basic Settings
4.1.2
0-01 Language
Default value:
[0] English
Setup:
1 setup
Data type:
Uint8
Select the language to be used in the display.
Option
[0]
[10]
[28]
0-03 Regional Settings
Default value:
[0] International
Setup:
1 setup
Data type:
Uint8
To meet the needs for different default settings in different parts of the world, parameter 0-03 Regional Settings is implemented in the
drive. The selected setting influences the default setting of the motor nominal frequency.
Option
[0]
[1]
0-04 Operating State at Power-up
Default value:
[1] Forced stop, ref=old
Danfoss A/S © 2024.01
Parameter type:
Conversion index:
Change during operation:
Name
English
Chinese
Portuguese
Parameter type:
Conversion index:
Change during operation:
Name
International
North America
Parameter type:
Option
–
True
Option
–
False
Description
Activate parameter 1-20 Motor Power
[kW] for setting the motor power in kW
and set the default value of parameter
1-23 Motor Frequency to 50 Hz.
Activate parameter 1-20 Motor Power
[kW] for setting the motor power in hp
and set the default value of parameter
1-23 Motor Frequency to 60 Hz.
Option
AU275649936274en-001401 / 130R0507 |
33