Table Of Contents - Danfoss VLT AutomationDrive FC 360 Programming Manual

Programming Guide | VLT® AutomationDrive FC 360
1-64 Resonance Dampening
Default value:
Size related
Setup:
All setups
Data type:
Uint16
Enter the resonance dampening value. Set parameter 1-64 Resonance Dampening and parameter 1-65 Resonance Dampening Time
Constant to help eliminate high-frequency resonance problems. To reduce resonance oscillation, increase the value of parameter 1-64
Resonance Dampening.
1-65 Resonance Dampening Time Constant
Default value:
0.005 s
Setup:
All setups
Data type:
Uint16
Set parameter 1-64 Resonance Dampening and parameter 1-65 Resonance Dampening Time Constant to help eliminate high-frequency
resonance problems. Enter the time constant that provides the best dampening.
1-66 Min. Current at Low Speed
Default value:
Size related
Setup:
All setups
Data type:
Uint32
Enter the minimum motor current at low speed. Increasing this current improves motor torque at low speed. Parameter 1-66 Min.
Current at Low Speed is enabled only for PM motor.
1-67 Load Type
Default value:
[0] Passive load
Setup:
All setups
Data type:
Uint8
Select the load type.
Option
[0]
[1]
1-68 Motor Inertia
Default value:
0.0000 kgm
Setup:
All setups
Data type:
Uint32
68
| Danfoss A/S © 2024.01
2
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Name
Passive load
Active load
Parameter type:
Conversion index:
Change during operation:
Range (0-500%)
0
True
Range (0.001-0.050 s)
-3
True
Range (0-120%)
0
True
Option
-
True
Range (0.0000-10000.0000
2
kgm )
-4
False
AU275649936274en-001401 / 130R0507