Danfoss VLT AutomationDrive FC 360 Programming Manual page 111

Programming Guide | VLT® AutomationDrive FC 360
Option
[0]
[1]
[2]
4-82 Power Limit Motor Mode
Default value:
100.0%
Setup:
All setups
Data type:
Uint16
The power limit motor mode is defined according to the motor power in parameter 1-20 Motor Power.
4-83 Power Limit Generator Mode
Default value:
100.0%
Setup:
All setups
Data type:
Uint16
The power limit generator mode is defined according to the motor power in parameter 1-20 Motor Power.
4-9* Directional Limits
4.5.8
4-90 Directional Limit Mode
Default value:
[0] Disabled
Setup:
All setups
Data type:
Uint8
Select whether the directional limits are enabled. With directional limits enabled, it is possible to specify different speed and torque limits
for clockwise and counterclockwise rotation directions.
Option
[0]
[1]
[2]
[3]
4-92 Positive Speed Limit [Hz]
Default value:
Size related
Setup:
All setups
Data type:
Uint16
Danfoss A/S © 2024.01
Name
Disabled
Enabled
When Activated
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Name
Disabled
Speed
Torque
Speed and Torque
Parameter type:
Conversion index:
Change during operation:
Description
Disable the function.
Enable the function.
This option requires activation by digital
input or configurable control word.
Range (0.0–200.0%)
-1
True
Range (0.0–200.0%)
-1
True
Option
–
True
Range (0.0–500.0 Hz)
-1
True
AU275649936274en-001401 / 130R0507 |
109