Danfoss VLT AutomationDrive FC 360 Programming Manual page 44

Programming Guide | VLT® AutomationDrive FC 360
0-21 Display Line 1.2 Small
Default value:
[1614] Motor current
Setup:
All setups
Data type:
Uint16
Select a variable to be shown in line 1, center position.
For the options of parameter 0-21 Display Line 1.2 Small, refer to parameter 0-20 Display Line 1.1 Small.
0-22 Display Line 1.3 Small
Default value:
[1610] Power [kW]
Setup:
All setups
Data type:
Uint16
Select a variable to be shown in line 1, right position.
For the options of parameter 0-22 Display Line 1.3 Small, refer to parameter 0-20 Display Line 1.1 Small.
0-23 Display Line 2 Large
Default value:
[1613] Frequency
Setup:
All setups
Data type:
Uint16
Select a variable to be shown in line 2.
For the options of parameter 0-23 Display Line 2 Large, refer to parameter 0-20 Display Line 1.1 Small.
0-24 Display Line 3 Large
Default value:
[1502] kWh Counter
Setup:
All setups
Data type:
Uint16
Select a variable to be shown in line 3.
For the options of parameter 0-24 Display Line 3 Large, refer to parameter 0-20 Display Line 1.1 Small.
0-3* LCP Custom Readout
4.1.5
Parameters for configuring the custom readout value and defining custom display texts. It is possible to customize the display elements
for various purposes.
Custom readout
The calculated value to be shown is based on settings in parameter 0-30 Custom Readout Unit, parameter 0-31 Custom Readout Min
Value (linear only), parameter 0-32 Custom Readout Max Value, parameter 4-14 Motor Speed High Limit [Hz], and actual speed.
42
| Danfoss A/S © 2024.01
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Option
–
True
Option
–
True
Option
–
True
Option
–
True
AU275649936274en-001401 / 130R0507