Danfoss VLT AutomationDrive FC 360 Programming Manual page 206

Programming Guide | VLT® AutomationDrive FC 360
Data type:
OctStr
Configure the IP subnet mask of the option. Read-only if parameter 12-00 IP Address Assignment is set to [1] DHCP or [2] BOOTP.
12-03 Default Gateway
Default value:
0
Setup:
1 setup
Data type:
OctStr
Configure the IP default gateway of the option. Read-only if parameter 12-00 IP Address Assignment is set to [1] DHCP or [2] BOOTP.
12-04 DHCP Server
Default value:
0
Setup:
1 setup
Data type:
OctStr
Read-only. Shows the IP address of the found DHCP or BOOTP server.
A power cycle is necessary after setting the IP parameters manually.
12-05 Lease Expires
Default value:
0
Setup:
All setups
Data type:
TimD
Read-only. Shows the lease time left for the current DHCP-assigned IP address.
12-06 Name Servers
Default value:
0
Setup:
1 setup
Data type:
OctStr
IP addresses of domain name servers. Can be automatically assigned when using DHCP.
12-07 Domain Name
Default value:
0
Setup:
1 setup
Data type:
VisStr
Domain name of the attached network. Can be automatically assigned when using DHCP network.
204
| Danfoss A/S © 2024.01
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
NOTICE
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
True
Range (0–4294967295)
0
True
Range (0–2147483647)
0
True
Range (0–4294967295)
0
True
Range (0–4294967295), Array
[2]
0
True
Range (1–48)
0
True
AU275649936274en-001401 / 130R0507