Danfoss VLT AutomationDrive FC 360 Programming Manual page 136

Programming Guide | VLT® AutomationDrive FC 360
Option
[73]
[74]
[75]
[80]
[81]
[82]
[83]
[95]
[160]
[161]
[165]
[166]
[167]
[168]
[169]
134
| Danfoss A/S © 2024.01
Name
Logic rule 3
Logic rule 4
Logic rule 5
SL digital output A
SL digital output B
SL digital output C
SL digital output D
Power Loss Detection
No alarm
Running reverse
Local ref active
Remote ref active
Start command active
Drive in hand mode
Drive in auto mode
Description
See parameter group 13-4* Logic Rules.
If logic rule 3 is evaluated as TRUE, the
output goes high. Otherwise, it is low.
See parameter group 13-4* Logic Rules.
If logic rule 4 is evaluated as TRUE, the
output goes high. Otherwise, it is low.
See parameter group 13-4* Logic Rules.
If logic rule 5 is evaluated as TRUE, the
output goes high. Otherwise, it is low.
See parameter 13-52 SL Controller Action.
Output A is low on [32] Smart Logic
Action. Output A is high on [38] Smart
Logic Action.
See parameter 13-52 SL Controller Action.
Output B is low on [32] Smart Logic
Action. Output B is high on [38] Smart
Logic Action.
See parameter 13-52 SL Controller Action.
Output C is low on [32] Smart Logic
Action. Output C is high on [38] Smart
Logic Action.
See parameter 13-52 SL Controller Action.
Output D is low on [32] Smart Logic
Action. Output D is high on [38] Smart
Logic Action.
The output is high when no alarm is
present.
The output is high when the drive is
running counterclockwise (the logical
product of the status bits Running AND
Reverse).
The output is high when there is an active
start command, and no stop command is
active.
The output is high when the drive is in
hand-on mode.
The output is high when the drive is in
auto-on mode.
AU275649936274en-001401 / 130R0507