Danfoss VLT AutomationDrive FC 360 Programming Manual page 245

Programming Guide | VLT® AutomationDrive FC 360
Option
[0]
[1]
[2]
14-51 DC-Link Voltage Compensation
Default value:
[1] On
Setup:
All setups
Data type:
Uint8
Enable or disable the DC-link voltage compensation.
Option
[0]
[1]
14-52 Fan Control
Default value:
[5] Constant-on mode
Setup:
1 setup
Data type:
Uint8
Select the fan control mode.
Option
[5]
[6]
[7]
[8]
14-55 Output Filter
Default value:
[0] No Filter
Setup:
1 setup
Data type:
Uint8
Select the type of output filter connected.
Danfoss A/S © 2024.01
Name
Off
On
Grid Type
Parameter type:
Conversion index:
Change during operation:
Name
Off
On
Parameter type:
Conversion index:
Change during operation:
Name
Constant-on mode
Constant-off mode
On-when-Inverter-is-on-else-off Mode
Variable-speed mode
Parameter type:
Conversion index:
Change during operation:
Description
Select [0] Off only when the drive is
connected to an isolated mains source (IT
mains).
Select [1] On to turn on the RFI filter. The
RFI filter ensures that the drive complies
with EMC standards.
Option
–
False
Option
–
True
Option
–
False
AU275649936274en-001401 / 130R0507 |
243