Danfoss VLT AutomationDrive FC 360 Programming Manual page 170

Programming Guide | VLT® AutomationDrive FC 360
Option
[0]
[1]
[2]
[7]
[8]
[11]
[32]
7-46 Process PID Feed Fwd Normal/ Inv. Ctrl.
Default value:
[0] Normal
Setup:
All setups
Data type:
Uint8
Select for the process PID feedforward normal or inverse control.
Option
[0]
[1]
7-48 PCD Feed Forward
Default value:
0
Setup:
All setups
Data type:
Uint16
Readout parameter where the bus parameter 7-45 Process PID Feed Fwd Resource [32] Bus PCD can be read. The feedforward set from
bus should be in N2 format.
7-49 Process PID Output Normal/ Inv. Ctrl.
Default value:
[0] Normal
Setup:
All setups
Data type:
Uint8
Select for the process PID output normal or inverse control.
168
| Danfoss A/S © 2024.01
Name
No function
Analog Input 53
Analog Input 54
Frequency input 29
Frequency input 33
Local bus reference
Bus PCD
Parameter type:
Conversion index:
Change during operation:
Name
Normal
Inverse
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Option
–
True
Description
Set the feedforward factor to treat the FF
resource as a positive value.
Treat the feedforward resource as a
negative value.
Range (0–65535)
0
True
Option
–
True
AU275649936274en-001401 / 130R0507