Danfoss VLT AutomationDrive FC 360 Programming Manual page 207

Programming Guide | VLT® AutomationDrive FC 360
12-08 Host Name
Default value:
0
Setup:
1 setup
Data type:
VisStr
Logical (given) name of option.
12-09 Physical Address
Default value:
0
Setup:
1 setup
Data type:
VisStr
Read-only. Show the physical (MAC) address of the option.
12-1* Ethernet Link Parameters
4.11.3
12-10 Link Status
Default value:
[0] No Link
Setup:
1 setup
Data type:
Uint8
Show the link status of the Ethernet ports.
Option
[0]
[1]
12-11 Link Duration
Default value:
Size related
Setup:
All setups
Data type:
TimD
Show the duration of the present link on each port in dd:hh:mm:ss.
12-12 Auto Negotiation
Default value:
[1] On
Setup:
1 setup
Data type:
Uint8
Configure auto negotiation of Ethernet link parameters, for each port: ON or OFF.
Danfoss A/S © 2024.01
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Name
No Link
Link
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Range (1–48)
0
True
Range (0–17)
0
True
Option, Array [2]
–
True
Description
Show the link status of the Ethernet ports.
Range (0–0), Array [2]
0
True
Option, Array [2]
–
True
AU275649936274en-001401 / 130R0507 |
205