Danfoss VLT AutomationDrive FC 360 Programming Manual page 113

Programming Guide | VLT® AutomationDrive FC 360
5-01 Terminal 27 Mode
Default value:
[0] Input
Setup:
All setups
Data type:
Uint8
Define terminal 27 as a digital input or output.
Option
[0]
[1]
5-02 Terminal 29 Mode
Default value:
[0] Input
Setup:
All setups
Data type:
Uint8
Define terminal 29 as a digital input or output.
Option
[0]
[1]
5-1* Digital Inputs
4.6.2
5-10 Terminal 18 Digital Input
Default value:
[8] Start
Setup:
All setups
Data type:
Uint8
Select the function from the available digital input range.
Option
[0]
[1]
[2]
Danfoss A/S © 2024.01
Parameter type:
Conversion index:
Change during operation:
Name
Input
Output
Parameter type:
Conversion index:
Change during operation:
Name
Input
Output
Parameter type:
Conversion index:
Change during operation:
Name
No operation
Reset
Coast inverse
Option
–
True
Description
Define terminal 27 as a digital input.
Define terminal 27 as a digital output.
Option
–
True
Description
Define terminal 29 as a digital input.
Define terminal 29 as a digital output.
Option
–
True
Description
No reaction to signals sent to the terminal.
Reset the drive after a TRIP/ALARM. Not all
alarms can be reset.
Coast stop, inverted input (NC). The drive
leaves the motor in free mode.
Logic 0=>coast stop.
AU275649936274en-001401 / 130R0507 |
111