Danfoss VLT AutomationDrive FC 360 Programming Manual page 267

Programming Guide | VLT® AutomationDrive FC 360
View the warning word 2 sent via the serial communication port in hex code.
16-94 Ext. Status Word
Default value:
0
Setup:
1 setup
Data type:
Uint32
Show the extended status word in hex code.
16-95 Ext. Status Word 2
Default value:
0
Setup:
1 setup
Data type:
Uint32
Show the extended status word 2 in hex code.
16-97 Alarm Word 3
Default value:
0
Setup:
1 setup
Data type:
Uint32
View the alarm word 3 sent via the serial communication port in hex code.
Parameter Group 17-** Feedback Options
4.16
17-0* Encoder Interface
4.16.1
This parameter group is only valid when VLT
17-00 Encoders Connected
Default value:
[0] One Encoder
Setup:
All setups
Data type:
Uint8
Select 1 or 2 encoders connected.
Option
[0]
[1]
Danfoss A/S © 2024.01
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
NOTICE
®
Encoder Input MCB 102 is installed.
Parameter type:
Conversion index:
Change during operation:
Name
One Encoder
Two Encoders
Range (0–0xFFFFFFFFUL)
0
True
Range (0–0xFFFFFFFFUL)
0
True
Range (0–0xFFFFFFFFUL)
0
True
Option
–
False
AU275649936274en-001401 / 130R0507 |
265