Danfoss VLT AutomationDrive FC 360 Programming Manual page 248

Programming Guide | VLT® AutomationDrive FC 360
Data type:
VisStr
A readout parameter to show which converter is running.
14-8* Options
4.13.9
14-89 Option Detection
Default value:
[0] Protect Option Config.
Setup:
1 setup
Data type:
Uint8
Select the behavior when an option change is detected. This parameter returns to [0] Protect Option Config. after an option change.
Option
[0]
[1]
14-9* Fault Settings
4.13.10
Use the parameters to configure the fault settings.
14-90 Fault Level
Default value:
[3] Trip Lock
Setup:
All setups
Data type:
Uint8
Use this parameter to customize fault levels. The type of the parameter is index, see
Option
[0]
[1]
[2]
[3]
246
| Danfoss A/S © 2024.01
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Name
Protect Option Config.
Enable Option Change
Parameter type:
Conversion index:
Change during operation:
Name
Off
Warning
Trip
Trip Lock
False
Option
–
True
Description
Freeze the current settings and avoids
unwanted changes when missing or
defective options are detected.
Settings can be changed when the system
configuration is being modified.
Option, Array [32]
–
True
Table 20.
Description
Alarm is set to trip lock.
AU275649936274en-001401 / 130R0507