Danfoss VLT AutomationDrive FC 360 Programming Manual page 47

Programming Guide | VLT® AutomationDrive FC 360
Option
[141]
[160]
[170]
[171]
[172]
[173]
[180]
0-31 Custom Readout Min Value
Default value:
0.00 CustomReadoutUnit
Setup:
1 setup
Data type:
Int32
This parameter sets the minimum value of the custom readout (occurs at 0 speed). It is only possible to select a value different from 0
when selecting a linear unit in parameter 0-30 Custom Readout Unit. For quadratic and cubic units, the minimum value is 0.
0-32 Custom Readout Max Value
Default value:
100.00 CustomReadoutUnit
Setup:
1 setup
Data type:
Int32
This parameter sets the maximum value to be shown when the motor speed has reached the value set in parameter 4-14 Motor Speed
High Limit [Hz].
0-37 Display Text 1
Default value:
–
Setup:
1 setup
Data type:
VisStr
Free text, for example, used for the device tag of fieldbus application.
0-38 Display Text 2
Default value:
–
Setup:
1 setup
Data type:
VisStr
Free text, for example, used for the location tag of fieldbus application.
Danfoss A/S © 2024.01
Name
ft/min
°F
psi
2
lb/in
in WG
ft WG
HP
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
AU275649936274en-001401 / 130R0507 |
Range (0.00–999999.99
CustomReadoutUnit)
-2
True
Range (0.00–999999.99
CustomReadoutUnit)
-2
True
Range
0
True
Range
0
True
45