Danfoss VLT AutomationDrive FC 360 Programming Manual page 282

Programming Guide | VLT® AutomationDrive FC 360
Data type:
Uint16
Set the time for which the broken belt conditions must be active before carrying out the action selected in parameter 22-60 Broken Belt
Function.
Parameter Group 30-** Special Features
4.20
30-2* Adv. Start Adjust
4.20.1
30-20 High Starting Torque Time [s]
Default value:
Size related
Setup:
All setups
Data type:
Uint16
High starting torque time for PM motors in VVC+ mode without feedback.
30-21 High Starting Torque Current [%]
Default value:
Size related
Setup:
All setups
Data type:
Uint32
High starting torque current for PM motors in VVC+ mode without feedback.
30-22 Locked Rotor Protection
Default value:
[0] Off
Setup:
All setups
Data type:
Uint8
Locked rotor detection for PM motor.
Option
[0]
[1]
30-23 Locked Rotor Detection Time [s]
Default value:
0.10 s
Setup:
All setups
Data type:
Uint8
Locked rotor detection time for PM motor.
280
| Danfoss A/S © 2024.01
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Name
Off
On
Parameter type:
Conversion index:
Change during operation:
True
Range (0.00–60.00 s)
-2
True
Range (0.0–200.0%)
-1
True
Option
–
True
Range (0.05–1.00 s)
-2
True
AU275649936274en-001401 / 130R0507