Danfoss VLT AutomationDrive FC 360 Programming Manual page 266

Programming Guide | VLT® AutomationDrive FC 360
16-86 FC Port REF 1
Default value:
0
Setup:
1 setup
Data type:
Int16
View the last received reference from the FC port.
16-88 Fieldbus Torque FF.
Default value:
0
Setup:
1 setup
Data type:
Int16
Set the fieldbus torque feedforward.
16-9* Diagnosis Readouts
4.15.7
Use the parameters to show alarm, warning, and extended status words.
16-90 Alarm Word
Default value:
0
Setup:
1 setup
Data type:
Uint32
View the alarm word sent via the serial communication port in hex code.
16-91 Alarm Word 2
Default value:
0
Setup:
1 setup
Data type:
Uint32
View the alarm word 2 sent via the serial communication port in hex code.
16-92 Warning Word
Default value:
0
Setup:
1 setup
Data type:
Uint32
View the warning word sent via the serial communication port in hex code.
16-93 Warning Word 2
Default value:
0
Setup:
1 setup
Data type:
Uint32
264
| Danfoss A/S © 2024.01
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Range (-32768–32767)
0
True
Range (-32768–32767)
0
True
Range (0–0xFFFFFFFFUL)
0
True
Range (0–0xFFFFFFFFUL)
0
True
Range (0–0xFFFFFFFFUL)
0
True
Range (0–0xFFFFFFFFUL)
0
True
AU275649936274en-001401 / 130R0507