Danfoss VLT AutomationDrive FC 360 Programming Manual page 264

Programming Guide | VLT® AutomationDrive FC 360
Data type:
Int32
View the actual value of impulses applied to terminal 27 in digital output mode.
16-70 Pulse output 29 [Hz]
Default value:
0
Setup:
All setups
Data type:
Int32
View the actual value of pulses to terminal 29 in digital output mode.
16-71 Relay output
Default value:
0
Setup:
1 setup
Data type:
Uint16
View the settings of all relays.
Table 23: Bits Definition
Bits
Bit 3
Bit 4
16-72 Counter A
Default value:
0
Setup:
1 setup
Data type:
Int16
View the present value of counter A. Counters are useful as comparator operands, see parameter 13-10 Comparator Operand. The value
can be reset or changed either via digital inputs (parameter group 5-1* Digital Inputs) or by using an SLC action (parameter 13-52 SL
Controller Action).
16-73 Counter B
Default value:
0
Setup:
1 setup
Data type:
Int16
View the present value of counter B. Counters are useful as comparator operands, see parameter 13-10 Comparator Operand. The value
can be reset or changed either via digital inputs (parameter group 5-1* Digital Inputs) or by using an SLC action (parameter 13-52 SL
Controller Action).
262
| Danfoss A/S © 2024.01
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Definition
User relay 02
User relay 01
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
False
Range (0–40000)
0
False
Range (0–31)
0
True
Range (-32768–32767)
0
True
Range (-32768–32767)
0
True
AU275649936274en-001401 / 130R0507