Danfoss VLT AutomationDrive FC 360 Programming Manual page 173

Programming Guide | VLT® AutomationDrive FC 360
Option
[0]
[1]
Parameter Group 8-** Comm. and Options
4.9
8-0* General Settings
4.9.1
8-00 Option A warning control
Default value:
Size related
Setup:
All setups
Data type:
Uint8
Enable or disable installed options.
Option
[0]
[1]
8-01 Control Site
Default value:
[0] Digital and ctrl.word
Setup:
All setups
Data type:
Uint8
The setting in this parameter overrides the settings in parameter 8-50 Coasting Select to parameter 8-56 Preset Reference Select.
Option
[0]
[1]
[2]
8-02 Control Source
Default value:
Size related
Setup:
All setups
Data type:
Uint8
Select the source of the control word.
Danfoss A/S © 2024.01
Name
Linear
Square root
Parameter type:
Conversion index:
Change during operation:
Name
None
Disable Warning
Parameter type:
Conversion index:
Change during operation:
Name
Digital and ctrl.word
Digital only
Control word only
Parameter type:
Conversion index:
Change during operation:
Option
–
True
Option
–
True
Description
Control by using both digital input and
control word.
Control by using digital inputs only.
Control by using control word only.
Option
–
True
AU275649936274en-001401 / 130R0507 |
171