Data Type: Octstr - Danfoss VLT AutomationDrive FC 360 Programming Manual

Programming Guide | VLT® AutomationDrive FC 360
Setup:
All setups
Data type:
Uint16
Readout of revision count.
Parameter Group 12-** Ethernet
4.11
More Information
4.11.1
For more information about Ethernet parameter descriptions, see the VLT® AutomationDrive FC 360 PROFINET Programming Guide.
Parameter Group 12-** Ethernet is only valid when PROFINET is used.
12-0* IP Settings
4.11.2
12-00 IP Address Assignment
Default value:
[10] DCP
Setup:
1 setup
Data type:
Uint8
Select the IP address assignment method.
Option
[0]
[1]
[2]
[10]
[20]
12-01 IP Address
Default value:
0
Setup:
1 setup
Data type:
OctStr
Configure the IP address of the option. Read-only if parameter 12-00 IP Address Assignment is set to [1] DHCP, [2] BOOTP, or via DIP
switches.
12-02 Subnet Mask
Default value:
0
Setup:
1 setup
Danfoss A/S © 2024.01
Conversion index:
Change during operation:
NOTICE
Parameter type:
Conversion index:
Change during operation:
Name
MANUAL
DHCP
BOOTP
DCP
From node ID
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
0
True
Option
–
True
Description
IP address can be set in parameter 12-01
IP Address.
IP address is assigned via DHCP server.
IP address is assigned via BOOTP server.
DCP is assigned via the DCP protocol.
Range (0–4294967295)
0
True
Range (0–4294967295)
0
AU275649936274en-001401 / 130R0507 |
203