Danfoss VLT AutomationDrive FC 360 Programming Manual page 48

Programming Guide | VLT® AutomationDrive FC 360
0-39 Display Text 3
Default value:
–
Setup:
1 setup
Data type:
VisStr
Free text, for example, used for the help tag of fieldbus application.
0-4* LCP Keypad
4.1.6
Enable, disable, and password protect individual keys on the LCP.
0-40 [Hand on] Key on LCP
Default value:
[1] Enabled
Setup:
All setups
Data type:
Uint8
Select [0] Disabled to avoid accidental start of the drive in [Hand on] mode. Setting can be locked by parameter 0-60 Main Menu
Password.
Option
[0]
[1]
0-42 [Auto on] Key on LCP
Default value:
[1] Enabled
Setup:
All setups
Data type:
Uint8
Select [0] Disabled to avoid accidental start of the drive in [Auto on] mode. Setting can be locked by parameter 0-60 Main Menu
Password.
Option
[0]
[1]
0-44 [Off/Reset] Key on LCP
Default value:
[1] Enabled
Setup:
All setups
Data type:
Uint8
46
| Danfoss A/S © 2024.01
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Name
Disabled
Enabled
Parameter type:
Conversion index:
Change during operation:
Name
Disabled
Enabled
Parameter type:
Conversion index:
Change during operation:
Range
0
True
Option
–
True
Description
Avoid accidental start of the drive in [Hand
on] mode.
[Hand on] mode is enabled.
Option
–
True
Description
Avoid accidental start of the drive in [Auto
on] mode.
[Auto on] mode is enabled.
Option
–
True
AU275649936274en-001401 / 130R0507