Danfoss VLT AutomationDrive FC 360 Programming Manual page 183

Programming Guide | VLT® AutomationDrive FC 360
8-53 Start Select
Default value:
[3] Logic OR
Setup:
All setups
Data type:
Uint8
Select the trigger for the start function.
Option
[0]
[1]
[2]
[3]
8-54 Reversing Select
Default value:
[3] Logic OR
Setup:
All setups
Data type:
Uint8
Select the trigger for the reversing function.
Option
[0]
[1]
[2]
[3]
8-55 Set-up Select
Default value:
[3] Logic OR
Setup:
All setups
Data type:
Uint8
Danfoss A/S © 2024.01
Parameter type:
Conversion index:
Change during operation:
Name
Digital input
Bus
Logic AND
Logic OR
Parameter type:
Conversion index:
Change during operation:
Name
Digital input
Bus
Logic AND
Logic OR
Parameter type:
Conversion index:
Change during operation:
Option
–
True
Description
A digital input triggers the start function.
A serial communication port or the
fieldbus triggers the start function.
The fieldbus/serial communication
port and a digital input trigger the start
function.
The fieldbus/serial communication port or
a digital input triggers the start function.
Option
–
True
Description
A digital input triggers the reversing
function.
A serial communication port or the
fieldbus triggers the reversing function.
The fieldbus/serial communication port
and a digital input trigger the reversing
function.
The fieldbus/serial communication port
or a digital input triggers the reversing
function.
Option
–
True
AU275649936274en-001401 / 130R0507 |
181