Danfoss VLT AutomationDrive FC 360 Programming Manual page 246

Programming Guide | VLT® AutomationDrive FC 360
Option
[0]
[1]
14-6* Auto Derate
4.13.7
Use this parameter group to configure automatic derating for the output current of the drive.
14-61 Function at Inverter Overload
Default value:
[0] Trip
Setup:
All setups
Data type:
Uint8
When the drive issues a drive overload warning, select whether to continue and trip the drive, or derate the output current.
Option
[0]
[1]
14-63 Min Switch Frequency
Default value:
[2] 2.0 kHz
Setup:
1 setup
Data type:
Uint8
Set the minimum switching frequency allowed by the output filter.
Option
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
244
| Danfoss A/S © 2024.01
Name
No Filter
Sine-wave filter
Parameter type:
Conversion index:
Change during operation:
Name
Trip
Derate
Parameter type:
Conversion index:
Change during operation:
Name
2.0 kHz
3.0 kHz
4.0 kHz
5.0 kHz
6.0 kHz
8.0 kHz
10.0 kHz
12.0 kHz
16.0 kHz
Option
–
True
Option
–
False
AU275649936274en-001401 / 130R0507