Danfoss VLT AutomationDrive FC 360 Programming Manual page 234

Programming Guide | VLT® AutomationDrive FC 360
Option
[2]
[3]
232
| Danfoss A/S © 2024.01
Name
Ctrl. ramp-down, trip
Coasting
Description
This selection is similar to selection [1]
Ctrl. ramp-down, except that in [2] Ctrl.
ramp-down, trip a reset is necessary for
starting up after power-up.
Centrifuges can run for an hour without
power supply. In those situations, it is
possible to select a coast function at
mains interruption, together with a flying
start, which occurs when the mains is
restored.
AU275649936274en-001401 / 130R0507