Table of Contents
Advertisement
3 Installation and commissioning
3.4.7.1 Assembling the sections
3.4.7 Assembling the track motion IRT 710
3.4.7.1 Assembling the sections
General
The IRT 710 should be assembled as set out in the procedure below. Detailed
descriptions of each stage can be found in the following sections.
Required spare parts
Spare part
Track cover L=1M (graphite white
color)
Track cover L=1M (orange color)
Track cover L=1.5M (graphite white
color)
Track cover L=1.5M (orange color)
Rack cover L=1M (graphite white
color)
Rack cover L=1M (orange color)
Rack cover L=1.5M (graphite white
color)
Rack cover L=1.5M (orange color)
Retangular rail L=0.5M kit
Retangular rail L=1M kit
Rack L=0.5M
Rack L=1M
Required equipment
Qty
1
1
1
1
Continues on next page
120
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRT 710 via myABB Business Portal,
www.abb.com/myABB.
Tool
Inner Hexagon Spanner 3 mm, 4 mm, 5 mm, 6 mm, 8 mm and 10 mm
Torque wrench 10 Nm -140 Nm
Adjustable wrench
Loctite 243
© Copyright 2023 ABB. All rights reserved.
Article number
Note
3HKA00000186234A
3HKA00000186234B
3HKA00000186240A
3HKA00000186240B
3HKA00000186236A
3HKA00000186236B
3HKA00000186243A
3HKA00000186243B
3HKA00000190206
3HKA00000190201
3HKA00000186246
ZST 300-221-500-R1
3HKA00000186248
ZST 300-221-1000-R1
3HKA00000186299-001 Revision: B
Product manual - IRT 710
Advertisement
Table of Contents
