ABB IRT 710 Product Manual page 176

3 Installation and commissioning
3.7.1 Activating the automatic lubrication system
Continued
2
EPS
The automatic lubrication system needs to be activated before using the IRT 710.
Once the system has been activated, it delivers the exact quantity of grease to
each port at required time interval, during one year.
Follow the instructions below to activate the cartridge:
1
2
176
Action
The grease is pushed in the piping by the pump;
a valve is sequencing the distribution to each port.
Action
Introduce the external 24 power and the cartridge
LONGTIME PD 0 in the port. The timer is activated
once the 24 power is on.
See Memolub manual on page 211
about MEMOLUB.
Tip
The 24 power cable is black.
The grease is pushed in the piping by the pump;
a valve is sequencing the distribution to each port.
© Copyright 2023 ABB. All rights reserved.
Note/Illustration
Note/Illustration
for instructions
xx2000002593
Product manual - IRT 710
3HKA00000186299-001 Revision: B