6 Calibration
6.3.2 Updating revolution counters for pin calibration
6.3.2 Updating revolution counters for pin calibration
Procedure
This procedure must be applied if revolution counter value is loss for the Track.
1
2
3
4
5
6
7
344
Action
Align the sharp edge of the moving part of the
calibration marker with the line of the fixed part
calibration marker.
Tap ABB on the top left of the FlexPendant.
Tap Calibration.
Select the desired mechanical unit.
Tap Update revolution counters.
Select the desired axis.
Tap Update.
© Copyright 2023 ABB. All rights reserved.
Note/Illustration
xx2300001300
Product manual - IRT 710
3HKA00000186299-001 Revision: B