ABB IRT 710 Product Manual page 304

5 Repair
5.4.2.3 Replacing the vertical separators
Continued
4
Refitting the vertical separators
Use this procedure to refit the vertical separators.
Refitting the vertical separators
1
2
Continues on next page
304
Action
If any plastic link bar with separators need to be
removed, use a screwdriver to pry it off.
Action
Note
Be careful with the direction of the cable chain
link when refitting it back to the track.
The side with the article number should always
be facing down when the cable chain lay down.
Insert the vertical separators back to the plastic
link bar according to cable layout.
© Copyright 2023 ABB. All rights reserved.
Note
xx2200000847
xx2200000848
Note
xx2200000853
Cable layout on page 318
Product manual - IRT 710
3HKA00000186299-001 Revision: B