Assembling The Pedestal (Option) - ABB IRT 710 Product Manual

3.4.8 Assembling the pedestal (option)

Overview
The pedestal, if ordered, is not mounted to the track motion at delivery.
Install the pedestal to the track motion according to this section.
Required equipment
Equipment
Lifting eye, M24
Lifting eye, M16
Lifting slings
Assembling the pedestal
1
2
3
Product manual - IRT 710
3HKA00000186299-001 Revision: B
Pedestal
3HKA00000190345
3HKA00000190346
3HKA00000190348
3HKA00000190349
3HKA00000190350
All
Action
Verify that the guide sleeves are installed in the
track motion carriage.
Fit lifting eyes to the pedestal.
Lift the pedestal to the mounting position using
lifting slings.
© Copyright 2023 ABB. All rights reserved.
3 Installation and commissioning
3.4.8 Assembling the pedestal (option)
Article number Note
- 4 pcs
- 3 pcs
- Lifting capacity accord-
ing to
on page
Note
Lifting eye, M24 (4 pcs)
xx2200000799
Lifting eye, M16 (3 pcs)
xx2200000798
Weight is specified in
estal on page
Continues on next page
Weight, pedestal
61.
Weight, ped-
61.
139