5.3.1.2 Replacing the terminal covers
Removing the terminal covers
Use this procedure to remove the terminal covers.
Preparations before removing the terminal covers
1
2
3
Removing the terminal cover
1
2
Product manual - IRT 710
3HKA00000186299-001 Revision: B
Action
If there is no enough space for the maintenance
work, clean the surroundings.
If there is any robot on the track, jog it to the lift-
ing/transportation position.
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
•
air pressure supply
to the product, before entering the safeguarded
space.
Action
DANGER
Turn off all electric power, hydraulic and
pneumatic pressure supplies to the robot
and for the track motion.
Remove the screws and covers.
© Copyright 2023 ABB. All rights reserved.
5.3.1.2 Replacing the terminal covers
Note
Note
xx2200000829
Continues on next page
5 Repair
263