ABB IRT 710 Product Manual page 127

25
26
27
Product manual - IRT 710
3HKA00000186299-001 Revision: B
Action
Install the rack covers.
Install the rail covers on the cover brackets.
CAUTION
Once again, release the carriage brake and push
the carriage manually along the length of its
stroke. Check that there is no interference
between the covers and the carriage.
© Copyright 2023 ABB. All rights reserved.
3 Installation and commissioning
3.4.7.1 Assembling the sections
Note/Illustration
xx2200000830
Screws: ISO 7380-2 M6x12 Class
10.9 (2 pcs)
Tightening torque: 8 Nm
xx2200000616
Screws: ISO 7380-2 M6x12 Class
10.9 (4 pcs)
Tightening torque: 8 Nm
Continued
127