ABB IRT 710 Product Manual page 284

5 Repair
5.4.1.2 Replacing the cable chain terminal covers
Continued
Refitting the external cable chain terminal covers
Use this procedure to refit the external cable chain terminal cover.
Refitting the external cable chain terminal cover
1
Concluding procedure
1
284
Action
Refit the cover and secure with the screws.
Action
DANGER
Make sure all safety requirements are met when
performing the first test run. See
may cause injury or damage on page
© Copyright 2023 ABB. All rights reserved.
Note
xx2200000839
Screws:9ADJ100086P0257 ISO 7380
M6x12 Class 10.9 (3 pcs)
Screws: ISO 7380-2 M6x12 Class 10.9 (3
pcs)
Tightening torque: 8 Nm
Note
First test run
29.
3HKA00000186299-001 Revision: B
Product manual - IRT 710