Table of Contents
Advertisement
Required tools and equipment
Equipment
Standard toolkit
Required consumables
Consumable
Locking liquid
Flange sealant
Replacing the 110 cam roller unit
Removing the 110 cam roller unit
Use this procedure to remove the cam roller unit.
Preparations before removing the cam roller unit
1
2
3
Product manual - IRT 710
3HKA00000186299-001 Revision: B
Action
If there is no enough space for the maintenance
work, clean the surroundings.
If there is any robot on the track, jog it to the lift-
ing/transportation position.
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
•
air pressure supply
to the product, before entering the safeguarded
space.
© Copyright 2023 ABB. All rights reserved.
5.2.2 Replacing the cam roller units
Article number
Note
-
Content is defined in section
Standard toolkit on page
Article number
Note
-
Loctite 2400 (or equivalent Loctite
243)
-
Loctite 574
Note
5 Repair
Continued
372.
Continues on next page
235
Advertisement
Table of Contents
