ABB IRT 710 Product Manual page 266

5 Repair
5.3.1.3 Replacing the rack covers
Continued
Refitting the rack covers
Use this procedure to refit the rack cover.
Refitting the rack cover
1
Concluding procedure
1
266
Action
Refit the cover and secure with the screws.
Action
DANGER
Make sure all safety requirements are met when
performing the first test run. See
may cause injury or damage on page
© Copyright 2023 ABB. All rights reserved.
Note
xx2200000830
Screws: ISO 7380-2 M6x12 Class 10.9 (2
pcs)
Tightening torque: 8 Nm
Note
First test run
29.
3HKA00000186299-001 Revision: B
Product manual - IRT 710