Assembly The Cable Of The Additional Axes Smb - ABB IRT 710 Product Manual

3.5.7 Assembly the cable of the additional axes SMB

Overview
The following section describes the assembly of the additional axes SMB connection
on IRC5 controller front panels.
Location of the cable
xx1100000710
Connecting the cable
1
Product manual - IRT 710
3HKA00000186299-001 Revision: B
Tip
The additional axes SMB is needed for IRB 4400, IRB 460 or spot welding
applications.
WARNING
Disconnect all electrical supply before installation of the cable.
Action
Connect the cable harness MS2 XS41 to
the connector A42.X5.
© Copyright 2023 ABB. All rights reserved.
3 Installation and commissioning
3.5.7 Assembly the cable of the additional axes SMB
Note
157