Table of Contents
Advertisement
3 Installation and commissioning
3.5.3 Installation of the cable chain
Continued
5
6
Continues on next page
148
Action
The cable chain should be perfectly aligned with
the IRT 710 chain tray. In order to achieve a cor-
rect alignment, it is recommended to fix both ends
of the chain when the carriage is at the end of its
stroke, and the chain is entirely unrolled in the
duct.
For very long chains, a ramp should be used to
prevent the chain from running on the cables ex-
iting the cable chain. If the cable chain appears
to be rubbing the cables and no ramp is installed,
please order the following from ABB:
•
The internal cable tray ramp up: 1pc
3HAW107700646 and 1pc
3HAW107700647.
•
The external cable tray ramp up: 1pc
3HAW107700646.
© Copyright 2023 ABB. All rights reserved.
Note/Illustration
xx2200001257
xx2200001258
xx2200001287
xx2200001259
Product manual - IRT 710
3HKA00000186299-001 Revision: B
Advertisement
Table of Contents
