ABB IRT 710 Product Manual page 64

2 Technical data
2.1 Technical data
Continued
Transfer load
The following table shows the maximum transfer load of IRT 710.
Load
Max. Transfer Load
Airborne noise level
The sound pressure level outside the working space.
IR(B)T type
IRT 710
Power consumption at max load
Type of Movement
-
Storage conditions
The table shows the allowed storage conditions for the robot:
Parameter
Minimum ambient temperature
Maximum ambient temperature
Maximum ambient temperature (less than 24 hrs)
Maximum ambient humidity
Maximum ambient altitude
Operating conditions
The table shows the allowed operating conditions for the robot:
Parameter
Minimum ambient temperature
Maximum ambient temperature
Maximum ambient humidity
Maximum ambient altitude
i
Continues on next page
64
Note
The payloads listed above are estimated for a wide range of IRT 710 applications.
Robot payload is specified in the Product Specification for the robot.
At low environmental temperature < 10
recommended to be run with the robot. Otherwise there is a risk that the robot stops or run with
lower performance due to temperature dependent oil- and grease viscosity.
© Copyright 2023 ABB. All rights reserved.
IRT 710
3,000 kg
Level
< 75 dB (A) / 1m
IR(B)T
Within specification for respective robot.
A power consumption measurement of a track motion with
manipulator could be done with a simulated cycle in RobotStu-
dio.
o
C is, as with any other machine, a warm-up phase
Value
5°C
45°C
70°C
Maximum 95% at constant temper-
ature.
1,000 m
Value
i
+5°C (41°F)
+ 45°C (113°F)
Maximum 95% at constant temper-
ature.
1,000 m
Product manual - IRT 710
3HKA00000186299-001 Revision: B