ABB IRT 710 Product Manual page 147

3
4
Product manual - IRT 710
3HKA00000186299-001 Revision: B
Action
In the cable chain, the cables should be separated
by the "separators", at least every 4 links.
That the mass of the cables and pipes inside the
chain should be balanced. Having all heavy cables
on the same side of the chain could cause prema-
ture wear.
The cables should be firmly attached on the tie-
wrap plate at the end of the cable chain on the
carriage side.
© Copyright 2023 ABB. All rights reserved.
3 Installation and commissioning
3.5.3 Installation of the cable chain
Note/Illustration
xx2200000856
xx2200000877
Continues on next page
Continued
147