ABB IRT 710 Product Manual page 276

5 Repair
5.3.4 Replacing the mechanical stops
Continued
Required consumables
Consumable
Locking liquid
Flange sealant
Removing the mechanical stops
Use this procedure to remove the mechanical stops.
Preparations before removing the mechanical stops
1
2
3
Removing the mechanical stop
1
Continues on next page
276
Action
If there is no enough space for the maintenance
work, clean the surroundings.
If there is any robot on the track, jog it to the lift-
ing/transportation position.
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the product, before entering the safeguarded
space.
Action
If there is external chain chain bracket
connected to the bumper kit, remove the
screws.
© Copyright 2023 ABB. All rights reserved.
Article number Note
- Loctite 2400 (or equivalent Loctite
243)
- Loctite 574
Note
Note
xx2200000843
3HKA00000186299-001 Revision: B
Product manual - IRT 710