Applicable Standards - ABB IRT 710 Product Manual

8 Reference information

8.2 Applicable standards

8.2 Applicable standards
General
The product is designed in accordance with ISO 10218-1:2011, Robots for industrial
environments - Safety requirements -Part 1 Robots, and applicable parts in the
normative references, as referred to from ISO 10218-1:2011. In case of deviations
from ISO 10218-1:2011, these are listed in the declaration of incorporation which
is part of the product delivery.
Normative standards as referred to from ISO 10218-1
Standard
ISO 9283:1998
ISO 10218-2
ISO 12100
ISO 13849-1:2006
ISO 13850
IEC 60204-1
Other standards used in design
Standard
IEC 61000-6-2
IEC 61000-6-4
ISO 13732-1:2006
IEC 60529:1989 + A2:2013
366
Note
The listed standards are valid at the time of the release of this document. Phased
out or replaced standards are removed from the list when needed.
© Copyright 2023 ABB. All rights reserved.
Description
Manipulating industrial robots - Performance criteria and related
test methods
Robots and robotic devices - Safety requirements for industrial
robots - Part 2: Robot systems and integration
Safety of machinery - General principles for design - Risk as-
sessment and risk reduction
Safety of machinery - Safety related parts of control systems
- Part 1: General principles for design
Safety of machinery - Emergency stop - Principles for design
Safety of machinery - Electrical equipment of machines - Part
1: General requirements
Description
Electromagnetic compatibility (EMC) – Part 6-2: Generic
standards – Immunity standard for industrial environments
Electromagnetic compatibility (EMC) – Part 6-4: Generic
standards – Emission standard for industrial environments
Ergonomics of the thermal environment - Part 1
Degrees of protection provided by enclosures (IP code)
Product manual - IRT 710
3HKA00000186299-001 Revision: B