ABB IRT 710 Product Manual page 245

Required tools and equipment
Equipment
Standard toolkit
Required consumables
Consumable
Locking liquid
Flange sealant
Removing the scrapers
Use this procedure to remove the scrapers.
Preparations before removing the scrapers
1
2
3
Removing the scrapers
1
Product manual - IRT 710
3HKA00000186299-001 Revision: B
Action
If there is no enough space for the maintenance
work, clean the surroundings.
If there is any robot on the track, jog it to the lift-
ing/transportation position.
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the product, before entering the safeguarded
space.
Action
Disconnect the lubrication tube from the
scraper kit.
© Copyright 2023 ABB. All rights reserved.
5.2.3 Replacing the scraper parts
Article number Note
- Content is defined in section
Standard toolkit on page
Article number Note
- Loctite 2400 (or equivalent Loctite
243)
- Loctite 574
Note
Note
xx2200000816
5 Repair
Continued
372.
Continues on next page
245