Technical Data - ABB IRT 710 Product Manual

2 Technical data

2.1 Technical data
Protection standards
Protection type
Standard
i
Explosive environments
The track motion must not be located or operated in an explosive environment.
Required space for installation
Formula for carriage tracks
Required space for carriage tracks is determined with the following formula:
Required space (mm) = 1000 x N
Dimensions
Without external cable chain
xx2200001281
1
Value of N is equal to the number of sections.
2
Valid if the length is N + 0.5 m
Product manual - IRT 710
3HKA00000186299-001 Revision: B
Only the electrical parts.
Note
The tables only give the space that the track motion itself requires. In addition
there probably needs to be additional space at the ends of the track motion at
the installation site. Add space as required.
© Copyright 2023 ABB. All rights reserved.
Protection class
i
IP65
1 2
+ 2 x 66 + 500
980
1000
2 Technical data
2.1 Technical data
Continues on next page
59