ABB IRT 710 Product Manual page 300

5 Repair
5.4.2.2 Replacing the inner cable chain link
Continued
4
Continues on next page
300
Action
Press the plastic link bar back one by one.
Tip
First insert the plastic link bars on one side to the
separators, then press the other side to the sep-
arators.
Always insert on the side of the separator with
bumps first.
xx2200000875
Note
If any separator is removed during the disas-
sembling procedure, insert it back to the correct
position.
© Copyright 2023 ABB. All rights reserved.
Note
xx2200000855
xx2200000856
Product manual - IRT 710
3HKA00000186299-001 Revision: B