Automatic Lubrication System - ABB IRT 710 Product Manual

4 Maintenance

4.5.2 Automatic lubrication system

4.5.2 Automatic lubrication system
Location
The figure below shows the location of the lubrication system.
xx2200000633
Required equipment
Equipment
Lubricant
Lubricant
Lubricant
Continues on next page
208
WARNING
Use lithium soap flowable grease, class NLGI 0, with a mineral oil base, doped
with EP (extreme pressure) additives. The base oil viscosity must be ISO VG68
to ISO VG 100.
Grease doped with EP additives is absolutely necessary, due to high loads on
blocks.
Customers must use the following lubrication suggested by ABB or malfunction
of the lubrication system may occur.
© Copyright 2023 ABB. All rights reserved.
Note
CASTROL Longtime PD0
Shell Gadus S2 V220 00
TOTAL Multis EP 0
Product manual - IRT 710
3HKA00000186299-001 Revision: B