ABB IRT 710 Product Manual page 328

5 Repair
5.4.2.6 Replacing the cables in cable chain
Continued
10
11
Refitting the cables in cable chain
Use this procedure to refit the cables in cable chain.
Refitting the cables in cable chain
1
Continues on next page
328
Action
Remove the cable.
If any very thick cable that cannot be removed
directly, remove the cables besides it and then
move the separators until the required cable can
be removed.
Action
Note
If any part of the cable chain tray has been re-
moved, use Loctite 243 when refitting parts. Also
note that the NYLOC nuts can only be used once.
© Copyright 2023 ABB. All rights reserved.
Note
xx2200000900
xx2200001087
Note
Product manual - IRT 710
3HKA00000186299-001 Revision: B