Work Inside The Working Range Of The Product - ABB IRT 710 Product Manual

1 Safety

1.3.4 Work inside the working range of the Product

1.3.4 Work inside the working range of the Product
30
WARNING
If work must be carried out within the work area of the Product, then the following
points must be observed:
• The operating mode selector on the controller must be in the manual mode
position to render the three-position enabling device operational and to block
operation from a computer link or remote control panel.
• The position Manual mode with full speed (100%) may only be used by
trained personnel who are aware of the risks that this entails. Manual mode
with full speed (100%) is not available in USA or Canada.
• Also, be aware of any danger that may be caused by rotating tools or other
devices mounted on the Product or inside the cell. Keep away from rotating
and moving parts to not get entangled with hair or clothing.
• Keep clear of moving parts so that limbs, hands, or fingers do not get trapped
or crushed by the Product.
• To prevent anyone else from taking control of the Product, always put a
safety lock on the cell door and bring the three-position enabling device with
you when entering the working space.
WARNING
NEVER, under any circumstances, stay beneath any part of the Product! There
is always a risk that the Product will move unexpectedly when its parts are moved
using the three-position enabling device or during other work inside the working
range of the Product.
© Copyright 2023 ABB. All rights reserved.
Product manual - IRT 710
3HKA00000186299-001 Revision: B