ABB IRT 710 Product Manual page 191

2
3
Product manual - IRT 710
3HKA00000186299-001 Revision: B
Action
Check the levelling screw nut marker for
any position shifted.
• If marker position is shifted, check
the level of the entire track in the
height direction.
- If there is any problem, adjust
it.
- If there is no problem, tighten
the nut of the leveling screw.
Check the levelling screw for damages or
missing.
• If visual wear is detected, replace
with a new one.
• If leveling screw is missing, install a
new one and align the track motion.
© Copyright 2023 ABB. All rights reserved.
4 Maintenance
4.3.4 Inspecting the levelling screw
Note
Geometric alignment of track motion IRT
710 on page 133
Continued
191