Table of Contents
Advertisement
6 Calibration
6.2.1 Synchronization marks and synchronization position for track motions
6.2 Synchronization marks and track motion movement directions
6.2.1 Synchronization marks and synchronization position for track motions
Introduction
This section shows the position of the synchronization marks and the
synchronization position for each carriage.
synchronization marks - Axis calibration
The calibration bracket should touch the axis pin on the track and be aligned with
the nearest axis synchronization mark at the same time.
xx2200001157
Continues on next page
338
© Copyright 2023 ABB. All rights reserved.
Product manual - IRT 710
3HKA00000186299-001 Revision: B
Advertisement
Table of Contents
