ABB IRT 710 Product Manual page 226

5 Repair
5.2.1 Replacing the motor and gearbox
Continued
Refitting the motor and gearbox
Use this procedure to refit the motor and gearbox.
Assembling the motor to the gearbox
1
2
Continues on next page
226
Action
Refit the bracket to the gearbox and secure
with the screws.
Align the gaps on the gearbox as illus-
trated.
© Copyright 2023 ABB. All rights reserved.
Note
xx2200000620
Screws: ISO 4762 M10x35 Class 12.9 (4
pcs)
Washers: BN 792 M10 Washer (4 pcs)
Tightening torque: 83 Nm
xx2200000622
Product manual - IRT 710
3HKA00000186299-001 Revision: B