ABB IRT 710 Product Manual page 240

5 Repair
5.2.2 Replacing the cam roller units
Continued
2
3
Continues on next page
240
Action
Remove the flange plate with its screws.
Rotate the cam roller unit with the cam
roller adjust tool.
Tip
Rotate the cam roller nipple away from the
rectangular rail.
Tip
When the 90 mm cam roller unit is re-
leased, it can be rotated with the finger.
© Copyright 2023 ABB. All rights reserved.
Note
xx2200000812
xx2200000814
Cam roller adjust tool (3HKA00000189966)
xx2200001177
Product manual - IRT 710
3HKA00000186299-001 Revision: B